 |
SIP803V
SINREY
SIP803V is a SIP desktop intercom host, supports full-duplex two-way intercom, G.722, G.711a/u codec, and has a good echo suppression function. SINREY provides a standard sip method, which can be used in other standard SIP systems and is compatible with standard SIP terminal equipment.
Support the standard SIP protocol, you don't need computer software support at all. After setting, you can directly communicate with the SIP intercom two-way or broadcast.
You can call the specified SIP terminal by entering the SIP number through the key, or choose to call the SIP terminal through the pre-downloaded address book. The intercom adopts full-duplex mode with echo cancellation function.
The local audio can be sent to all other terminals to realize the function of regional broadcasting.
The SIP terminal number and RTP multicast address can be downloaded to the host, so that the SIP microphone host can initiate SIP intercom or multicast through simple operations.
Compatible with SIP711V terminals and other intercom terminals in the standard SIP system, you can freely choose to build a SIP intercom system.
Network interface: 10/100Base-TX adaptive network, RJ45 interface, sending and receiving data indication
Network protocol: support SIP v1 (RFC2543), v2 (RFC3261), TCP, UDP, RTP, ARP, ICMP, DHCP, DNS, IGMP, etc.
MIC input: built-in high-performance gooseneck microphone, frequency domain 70 ~ 12.K5Hz; typical amplitude 50mVpp, signal-to-noise ratio 68dB
Line input: can be used as monitor or intercom, typical amplitude 2000mVpp
Line output: external active speaker or power amplifier, typical amplitude 2200mVpp
Intercom output: comes with a waterproof 3W speaker
Intercom mode: support quiet mode and noisy mode, button answering and automatic answering, on-site hanging up and remote hanging up and other modes
Relay output: support voice control
Input voltage: DC 9~24V
Power consumption: Static <300mW
Working temperature: -40℃～85℃
Dimensions: 205×140×55mm (without microphone)
Panel: aluminum alloy brushed shell
Weight: 1kg (including microphone rod)
SIP803V is a SIP desktop intercom host, supports full-duplex two-way intercom, G.722, G.711a/u codec, and has a good echo suppression function. SINREY provides a standard sip method, which can be used in other standard SIP systems and is compatible with standard SIP terminal equipment.
Support the standard SIP protocol, you don't need computer software support at all. After setting, you can directly communicate with the SIP intercom two-way or broadcast.
You can call the specified SIP terminal by entering the SIP number through the key, or choose to call the SIP terminal through the pre-downloaded address book. The intercom adopts full-duplex mode with echo cancellation function.
The local audio can be sent to all other terminals to realize the function of regional broadcasting.
The SIP terminal number and RTP multicast address can be downloaded to the host, so that the SIP microphone host can initiate SIP intercom or multicast through simple operations.
Compatible with SIP711V terminals and other intercom terminals in the standard SIP system, you can freely choose to build a SIP intercom system.
Network interface: 10/100Base-TX adaptive network, RJ45 interface, sending and receiving data indication
Network protocol: support SIP v1 (RFC2543), v2 (RFC3261), TCP, UDP, RTP, ARP, ICMP, DHCP, DNS, IGMP, etc.
MIC input: built-in high-performance gooseneck microphone, frequency domain 70 ~ 12.K5Hz; typical amplitude 50mVpp, signal-to-noise ratio 68dB
Line input: can be used as monitor or intercom, typical amplitude 2000mVpp
Line output: external active speaker or power amplifier, typical amplitude 2200mVpp
Intercom output: comes with a waterproof 3W speaker
Intercom mode: support quiet mode and noisy mode, button answering and automatic answering, on-site hanging up and remote hanging up and other modes
Relay output: support voice control
Input voltage: DC 9~24V
Power consumption: Static <300mW
Working temperature: -40℃～85℃
Dimensions: 205×140×55mm (without microphone)
Panel: aluminum alloy brushed shell
Weight: 1kg (including microphone rod)
