 |
SIP804V
SINREY
SIP804V is a two-button helper intercom with 10/100M Ethernet interface, supporting G.711 audio decoding, which receives audio data from SIP network and decodes and plays in real time, and also configures microphone input and speaker output.SIP804V can realize SIP intercom, multicast and other functions.
As a SIP intercom terminal, SIP804T supports full-duplex two-way intercom and has good echo suppression function. It supports standard SIP protocol and can be used extremely well with standard SIP system.
Installation & Configuration
When the desktop microphone SIP804V is powered up, it will automatically obtain an IP address (BootP or DHCP) or find its IP address using Manager software. This terminal can also be easily configured and controlled via a standard web browser.
Application Development & Integration
SIP804V supports various control and communication modes, and we provide development documentation and programming examples for playback as well as SIP intercom (off SIP server). Serial port control commands and network control commands are also available. Software developers can write their own audio applications with custom features.
Parameters
Network interface: 10/100Base-TX adaptive network, RJ45 interface, send and receive data instructions
Network protocol: support TCP, UDP, RTP, ARP, ICMP, DHCP, DNS, IGMP, etc.
MIC input: comes with high-performance microphone, frequency range 70 ~ 12.K5Hz; typical amplitude 50mVpp, signal-to-noise ratio 68dB
Audio output: comes with a waterproof 3W speaker
Intercom mode: support quiet mode and noisy mode, key answer and automatic answer, on-site hang-up and remote hang-up, etc.
Input voltage: DC 9~24V
Power consumption: static <300mW
Operating temperature: -40℃～85℃
Specification size: 150×140×55mm (without microphone pole)
Panel: brushed aluminum alloy shell
Weight: 0.6kg (including microphone pole)
SIP804V is a two-button helper intercom with 10/100M Ethernet interface, supporting G.711 audio decoding, which receives audio data from SIP network and decodes and plays in real time, and also configures microphone input and speaker output.SIP804V can realize SIP intercom, multicast and other functions.
As a SIP intercom terminal, SIP804T supports full-duplex two-way intercom and has good echo suppression function. It supports standard SIP protocol and can be used extremely well with standard SIP system.
Installation & Configuration
When the desktop microphone SIP804V is powered up, it will automatically obtain an IP address (BootP or DHCP) or find its IP address using Manager software. This terminal can also be easily configured and controlled via a standard web browser.
Application Development & Integration
SIP804V supports various control and communication modes, and we provide development documentation and programming examples for playback as well as SIP intercom (off SIP server). Serial port control commands and network control commands are also available. Software developers can write their own audio applications with custom features.
Parameters
Network interface: 10/100Base-TX adaptive network, RJ45 interface, send and receive data instructions
Network protocol: support TCP, UDP, RTP, ARP, ICMP, DHCP, DNS, IGMP, etc.
MIC input: comes with high-performance microphone, frequency range 70 ~ 12.K5Hz; typical amplitude 50mVpp, signal-to-noise ratio 68dB
Audio output: comes with a waterproof 3W speaker
Intercom mode: support quiet mode and noisy mode, key answer and automatic answer, on-site hang-up and remote hang-up, etc.
Input voltage: DC 9~24V
Power consumption: static <300mW
Operating temperature: -40℃～85℃
Specification size: 150×140×55mm (without microphone pole)
Panel: brushed aluminum alloy shell
Weight: 0.6kg (including microphone pole)
