 |
SIP2402V
SINREY
The SIP2402V Network Audio Module is a versatile, standalone SIP audio playback module with 2*15W power amplifier audio outputs. The module is specifically designed to decode and play back SIP protocol and RTP audio streams received from the network. Supporting various network protocols and audio decoding protocols, it can be used in VoIP, IP paging and high quality music streaming.
Power input: Voltage DC 12 ~ 24V.Maximum working current, 2000mA
Temperature: Operating temperature range Industrial grade: -40～85℃,storage temperature range -40～85℃
Network: 10/100M Base adaptive Ethernet interface
Line Out output:Load 10KΩ, typical 1000Vrms, signal-to-noise ratio 95dB (in playback mode)
RL-Line input:Local PA input, typical amplitude 1000mVrms, signal-to-noise ratio 95dB
Power output: Power amplifier output, output power 2*15W or 1*40W, connected to 8 ohm,constant resistance speaker
Decoding : Provide stereo playback, up to 48kHz, 320kbps audio stream, support
MP3.WAV (PCM +IMA ADPCM), G.711 a/u, G.722 and other formats.The minimum delay is50ms
Unidirectional mode: One-way intercom(reception only), with high-performance echo
suppression algorithm, 8kHz sampling, G.711a/u, G.722 encoding.The minimum delay is 80ms
Module size: Length x width x height: 5.7 x 5.7 x 1.7cm
• Various commercial network audio streaming applications
• Network alarm, network player
• Universal two-way full-duplex VoIP intercom for paging and intercomapplications
• Source Encoder for IP Audio Distribution Applications
• Background Music and Music On Hold Encoder for VoIP Applications
• Compatible with various low-latency IP audio encoders
• Unmanned parking lot, self-service charging station intercom terminal
• Expressway tunnel intercom, toll station intercom terminal
The SIP2402V Network Audio Module is a versatile, standalone SIP audio playback module with 2*15W power amplifier audio outputs. The module is specifically designed to decode and play back SIP protocol and RTP audio streams received from the network. Supporting various network protocols and audio decoding protocols, it can be used in VoIP, IP paging and high quality music streaming.
Power input: Voltage DC 12 ~ 24V.Maximum working current, 2000mA
Temperature: Operating temperature range Industrial grade: -40～85℃,storage temperature range -40～85℃
Network: 10/100M Base adaptive Ethernet interface
Line Out output:Load 10KΩ, typical 1000Vrms, signal-to-noise ratio 95dB (in playback mode)
RL-Line input:Local PA input, typical amplitude 1000mVrms, signal-to-noise ratio 95dB
Power output: Power amplifier output, output power 2*15W or 1*40W, connected to 8 ohm,constant resistance speaker
Decoding : Provide stereo playback, up to 48kHz, 320kbps audio stream, support
MP3.WAV (PCM +IMA ADPCM), G.711 a/u, G.722 and other formats.The minimum delay is50ms
Unidirectional mode: One-way intercom(reception only), with high-performance echo
suppression algorithm, 8kHz sampling, G.711a/u, G.722 encoding.The minimum delay is 80ms
Module size: Length x width x height: 5.7 x 5.7 x 1.7cm
• Various commercial network audio streaming applications
• Network alarm, network player
• Universal two-way full-duplex VoIP intercom for paging and intercomapplications
• Source Encoder for IP Audio Distribution Applications
• Background Music and Music On Hold Encoder for VoIP Applications
• Compatible with various low-latency IP audio encoders
• Unmanned parking lot, self-service charging station intercom terminal
• Expressway tunnel intercom, toll station intercom terminal
