 |
SIP2401V
SINREY
Description
SINREY SIP2401V network audio module is a versatile standalone SIP audio module with 2*15W power amplifier output. It seamlessly integrates into OEM products, offering encoding and decoding capabilities for SIP and RTP audio streams. The module is compatible with a variety of network protocols and audio codecs, catering to applications like VoIP, IP paging, and high-quality music streaming.
• Standard RJ45 network interface, providing firmware online remote upgrade;
• Based on ARM + DSP architecture, high-speed industrial chip is adopted, with startup time ≤ 1s;
• Provide mic interface to realize two-way voice intercom
• It has an audio line output port, which can be externally connected to an active speaker for sound amplification;
• With audio line input port, external active microphone can be connected for intercom.
• 2 * 15W audio power amplifier output, can be connected to 8 ohm constant resistance horn
Parameters
power input: Voltage DC 12 ~ 24V.Maximum working current, 2000mA
temperature: Operating temperature range Industrial grade: -40～85℃,storage temperature range -40～85℃
Network : 10/100M Base adaptive Ethernet interface
Mic input: Typical amplitude 50mVrms, signal-to-noise ratio 95dB
LineIn input: Typical amplitude 1000mVrms, SNR 95dB
Line Out output:Load 10KΩ, typical 1000Vrms, signal-to-noise ratio 95dB (in playback mode)
RL-Line input: Local PA input, typical amplitude 1000mVrms, signal-to-noise ratio 95dB
Power output: Power amplifier output, output power 2*15W or 1*40W, connected to 8 ohm,constant resistance speaker
Decoding : Provide stereo playback, up to 48kHz, 320kbps audio stream, support
MP3.WAV (PCM +IMA ADPCM), G.711 a/u, G.722 and other formats.The minimum delay is50ms
Encoding : Support G.711a/u, G.722 and RTP mode.The minimum delay is 30ms
Bidirectional : Two-way intercom, with high-performance echo suppression algorithm, support G.711 a/u, G.722 encoding.The minimum delay is 80ms
Intercom control port: There are three control interfaces of Call1, Call2 and Call3 in total, and this interface has two working modes: [Pulse Mode] and [Hold Mode].
control serial interface: Baud rate 115.2kbps
module size: Length x width x height: 5.7 x 5.7 x 1.7cm
Description
SINREY SIP2401V network audio module is a versatile standalone SIP audio module with 2*15W power amplifier output. It seamlessly integrates into OEM products, offering encoding and decoding capabilities for SIP and RTP audio streams. The module is compatible with a variety of network protocols and audio codecs, catering to applications like VoIP, IP paging, and high-quality music streaming.
• Standard RJ45 network interface, providing firmware online remote upgrade;
• Based on ARM + DSP architecture, high-speed industrial chip is adopted, with startup time ≤ 1s;
• Provide mic interface to realize two-way voice intercom
• It has an audio line output port, which can be externally connected to an active speaker for sound amplification;
• With audio line input port, external active microphone can be connected for intercom.
• 2 * 15W audio power amplifier output, can be connected to 8 ohm constant resistance horn
Parameters
power input: Voltage DC 12 ~ 24V.Maximum working current, 2000mA
temperature: Operating temperature range Industrial grade: -40～85℃,storage temperature range -40～85℃
Network : 10/100M Base adaptive Ethernet interface
Mic input: Typical amplitude 50mVrms, signal-to-noise ratio 95dB
LineIn input: Typical amplitude 1000mVrms, SNR 95dB
Line Out output:Load 10KΩ, typical 1000Vrms, signal-to-noise ratio 95dB (in playback mode)
RL-Line input: Local PA input, typical amplitude 1000mVrms, signal-to-noise ratio 95dB
Power output: Power amplifier output, output power 2*15W or 1*40W, connected to 8 ohm,constant resistance speaker
Decoding : Provide stereo playback, up to 48kHz, 320kbps audio stream, support
MP3.WAV (PCM +IMA ADPCM), G.711 a/u, G.722 and other formats.The minimum delay is50ms
Encoding : Support G.711a/u, G.722 and RTP mode.The minimum delay is 30ms
Bidirectional : Two-way intercom, with high-performance echo suppression algorithm, support G.711 a/u, G.722 encoding.The minimum delay is 80ms
Intercom control port: There are three control interfaces of Call1, Call2 and Call3 in total, and this interface has two working modes: [Pulse Mode] and [Hold Mode].
control serial interface: Baud rate 115.2kbps
module size: Length x width x height: 5.7 x 5.7 x 1.7cm
